Dear All,
Just to let everyone know that RUGWA on 5th November 2008 will be changed to 12th November 2008; due to the AIA National BIM draft guidelines & case study project 2008 October/November Workshops on 5th November 2008.
I will be attending this workshop at AIA. If you’re interested in attending this workshop, please find the details below.
Confirming Venues:
The workshop is from 5:00–8:00pm
The venue and date are as follows:
Perth: Wednesday 5th November 2008
Australian Institute of Architects
33 Broadway, Nedlands
Please find attached the Draft Guidelines of the workshop.
To register this workshop please email Scott Beazley :
scott.beazley@construction-innovation.info by 3rd November 2008. Registration is free.
If you are hoping to come, please let Scott know for catering purposes.
Kindly find the following details for RUGWA on 12th November 2008.
WESTERN AUSTRALIAN REVIT USER GROUP MEETING
Wednesday, 12th November 2008
4:00pm to 6:00pm
Light refreshments provided
Venue: Wood & Grieve Engineers
(Level 3, Hyatt Centre, 3 Plain street, East Perth)
This meeting will be an open session.
So bring along your favourite tips, tricks, workarounds & hacks! If you have a specific project or example, put it on a USB stick and bring it along
Light refreshments will be served at the end of the session.
Please come back to check this message, as it will be updated as any changes occur.
Please register if you will be attending by emailing your details to Juni Dharmawan,
juni.dharmawan@aecsystems.com.au. This will assist us in providing numbers for catering.
If you know of anyone who would be interested in attending, please encourage them to come along; the larger and more active the group, the more value it is to all involved.
Contact: Ali McCandless on 0412 361 320,
ali.mccandless@aecsystems.com.au or email Juni Dharmawan at
juni.dharmawan@aecsystems.com.au for further details
